-
Who this checklist is for
-
Step 1 — Write the spec sheet before you open any catalog
-
Step 2 — Verify installation geometry, not product photos
-
Step 3 — Sensor taps are an electrical decision, not a plumbing one
-
Step 4 — Bronze is not a color, it's a category
-
Step 5 — Compare landed cost, not list price
-
Step 6 — Ask three questions before you cut the PO
-
Common mistakes to watch for
Who this checklist is for
If someone just dropped a fixture list on your desk — "we need three basin mixer taps for sale in the new restroom, a set of kitchen wall taps for the break room, a bronze shower handle to match the one in the showroom photo, and oh, the accessible suite needs a basin mixer tall version" — this is for you.
When I first started handling facilities purchasing for a ~140-person company, I assumed buying faucets was like buying office chairs. Pick a color, pick a price, done. Two years and roughly $180K of plumbing orders later, I know better. My first fixture order came back with three handles that all claimed to be "bronze" and all looked like different metals. I've since run facility refits across three locations, working with about eight vendors and processing between 60 and 80 POs a year.
Here's the six-step process I now use every time.
Step 1 — Write the spec sheet before you open any catalog
Most buyers do this backwards. They browse product listings first, fall in love with a finish, then try to fit the fixture to the hole in the wall. That's how you end up with a return.
Before I look at a single product page, I ask the installer or the building engineer for four things:
- Hole diameter and drill spacing at each fixture location
- Inlet position (wall-mounted vs. deck-mounted)
- Countertop or wall surface material
- Whether the rough-in is already in place or still being planned
That last one matters more than people realize. Kitchen wall taps need the in-wall valve body positioned at a specific depth during rough-in. If the wall's already closed up, your options shrink fast. Ask now, not after the drywall goes in.
Step 2 — Verify installation geometry, not product photos
This step is pure math, and it's the one people skip most often.
A basin mixer tall sits higher to clear a vessel sink. Put a standard-height mixer next to a vessel basin and the spout won't reach the water line. Put a tall one next to a drop-in basin and it looks like a lawn ornament. Both are non-returnable once installed, in most cases.
Two numbers I always confirm in writing from the vendor:
- Spout reach and clearance height (from the deck to the outlet)
- Minimum counter thickness the fixture can clamp to
If the answer is "it depends," that's your signal to walk. A supplier who can't give you a number doesn't know their own product.
Step 3 — Sensor taps are an electrical decision, not a plumbing one
A basin tap sensor looks like a plumbing purchase. It isn't. It's a power-and-maintenance decision that happens to involve water.
You've got three power options for sensor fixtures:
- Battery-powered (easy install, painful upkeep)
- Hardwired (higher upfront cost, lower lifetime hassle)
- Hybrid (battery backup on a mains connection)
I used to think battery sensor taps were the obvious pick for retrofit work. Then I did the math on changing batteries across 12 sinks every 9–14 months, and the labor cost alone made hardwiring look cheap.
For a high-traffic public restroom or a leased space where you can't easily rewire, battery might still win. For an owned building with a long horizon, hardwire. There's no universal right answer here — I'm not an electrician, so I loop in whoever handles the building's electrical work before specifying either option.
Step 4 — Bronze is not a color, it's a category
This is the one that burned me. "Bronze" in a product listing can mean:
- Oil-rubbed bronze
- Brushed bronze
- Brushed oil-rubbed bronze
- Warm bronze
- Antique bronze
And they are visibly different, especially next to natural light. If you're buying a bronze shower handle to match an existing trim kit or a photo the client sent you, don't trust the PDF swatch. Ask for a physical sample plate, or buy one unit first and check it in the actual lighting.
Honestly, I'm not sure why bronze finishes vary this much between vendors of the same category. My best guess is that the PVD process and topcoat formulation differ more than the names suggest. If anyone in sourcing understands the chemistry better, I'd genuinely like to hear it.
Step 5 — Compare landed cost, not list price
Faucets are heavy and oddly shaped, and that makes shipping a real line item. Before I approve any quote, I build a four-line landed cost comparison:
- Unit price × quantity
- Freight (weight-based or dimensional)
- Duties, if importing from outside the country
- Return fee / restocking fee, if the item doesn't fit
A standing tub faucet is a good example. Floor-mounted styles often ship in a long, awkward crate that gets treated as oversized freight. That can flip a cheaper unit into the most expensive option on the sheet. Same with some tall basin mixers — anything where the box length exceeds standard parcel limits will get a shipping surprise.
One more thing worth flagging: the FTC's advertising guidelines require that product claims like "water-saving" or "lead-free certified" be truthful and substantiated. If a listing leans hard on green marketing without a cert number, ask for the documentation before you buy.
Step 6 — Ask three questions before you cut the PO
Every quote I approve now gets the same three questions in writing:
- Can I order the cartridge/valve/aerator as a standalone part?
- What's the warranty length, and does it cover parts, labor, or both?
- What's the standard lead time, and what's the actual average over the last 6 months?
The first question matters most. Cartridges and sensor modules are the parts that fail first. If the vendor can't sell you a replacement cartridge, the entire fixture becomes a throwaway when it drips — and in a commercial building, they drip. Five years from install, you're replacing the whole unit instead of a $40 part.
If a supplier can't answer question three with anything but "depends," that's also telling. Ordering lead time is the single biggest reason my team has missed project milestones. It's not the fixture's fault. It's the vendor's.
Common mistakes to watch for
- Buying finish before spec. Finish numbers change. Hole sizes don't.
- Assuming "bronze" is one thing. It isn't, and you'll find out on install day.
- Skipping the landed-cost math on bulk freight items. Especially standing tub faucets.
- Not asking about replacement parts. This is the one that quietly costs you the most.
- Wiring sensor taps into a plumbing budget. Sensor fixtures are electrical scope, so budget accordingly.
None of this is glamorous. But a fixture order that arrives, fits, and matches — the first time — is worth the extra 30 minutes of upfront checks. I've paid the "figure it out later" tax more than once. You don't have to.